NanoEL AB Antimicrobial Disinfectant Coating Textile & Fabric Solution 10

 

Feature
Antimicrobial coating for textile
Antimicrobial effect lasts up to 10 times of washing.

Target surface
Cotton, Untreated wool, Synthetic fibers, Linen
Textile (absorbent) surfaces

Contents
NanoEL AB Textile Solution 10

Package
Reatil: 80ml kit/ 250ml kit
Industrial: 1L / 20L

Product information
Work temperature: 3°C ~ 40°C
Dosage: 0.2m² ~ 0.4m²/ml
Durability: 10-time washing

Lineup

Consumer(Retail) package

NanoEL AB Antimicrobial Disinfectant Coating Textile Solution 10

80ml kit

Contents
NanoEL AB Textile

Introduction
This is a consumer package for coating on textile.

Available area
4㎡~8㎡

NanoEL AB 
Antimicrobial Coating Textile Solution 10

NanoEL AB Antimicrobial Disinfectant Coating Textile Solution 10

250ml kit

Contents
NanoEL AB Textile

Introduction
This is a consumer package for coating on textile.

Available area
12㎡~24㎡

Industrial(Partner) package

NanoELAB_Textile 1L

NanoEL AB Antimicrobial Disinfectant Coating Textile 1L

Contents NanoEL AB Textile Introduction This is an industrial package for coating on textiles. Available area 200㎡~400㎡
20L_NanoELAB_Textile

NanoELAB Antimicrobial Disinfectant Coating Textile 20L

Contents
NanoEL AB Textile

Introduction
This is an industrial package for coating on textiles.

Available area
4000㎡~8000㎡

Usage

① Anti-microbial coating:

Product : NanoEL AB Textile

Clean the surface, shake NanoEL AB Textile well then spray evenly until the surface is moist.

  • Wash and dry the target textile well before coating.
  • The coating surface is invisible since it is a 100% transparent and ultra-thin layer (150nm).

② Activate the surface

Do not touch for 30 min. for activating the stable coating surface. For best results, 6 hours curing time is recommended.

For professional application

NanoEL AB can be applied to massive targets in a professional way like a high-pressure sprayer, automatic facility. Please contact sales2@khaiel.com for more information.

Maintenance

Washing

Regular washing is needed since the dust on the coating surface might reduce the antimicrobial effects. Use a neutral detergent to avoid damaging the coating layer.

Recoating

In general condition, the coating layer endures 10 times washing so recoating before 10th washing.

Caution

  • Store to avoid freezing. Do not expose heat or direct ray of the sun.
  • Keep away from children.
  • General advice: If symptoms appear, consult a doctor.
  • If inhaled: Move out of the dangerous area and find a place to get fresh air.
  • Skin contact: Clean well with water and soap the contacted area.
  • Eye contact: Clean with a large amount of water.
  • If swallowed: Symptoms appear, seek medical advice.

For Plastic, Ceramic, Glass and Metal surface

NanoEL AB Surface Solution 365

Example of NanoEL AB Textile

Contact us

1 + 15 =

The captcha should be input for preventing spam.