NanoEL AB 

Antimicrobial Surface Disinfectant Coating Solution 365

 

Feature
The long-lasting antimicrobial coating
High durability with 2 step application-Primer & Coating

Target surface
Plastic, Ceramic, Glass and Metal surface
Hard & non-absorbent surfaces

Contents
NanoEL AB Primer + NanoEL AB Pro(Antimcirobial Coating) + Easy coating kit + Notification sticker

Package
Reatil: 20ml kit/ 60ml kit
Industrial: 1L / 20L

Product information
Work temperature: 3°C ~ 40°C
Dosage: 0.2m² ~ 0.4m²/ml

Lineup

Consumer(Retail) package

NanoEL AB Antimicrobial Disinfectant Coating Surface Solution 365

20ml kit

Contents
NanoEL AB Primer + NanoEL AB Pro(Antimcirobial Coating) + Easy coating kit + Notification sticker

Introduction
This is a consumer package with the easy-coating kit (gloves, non-woven fabric for coating) and a coating notification sticker.

Available area
4㎡~8㎡

NanoEL AB Antimicrobial Disinfectant Coating Surface Solution 365

60ml kit

Contents
NanoEL AB Primer + NanoEL AB Pro(Antimcirobial Coating) + Easy coating kit + Notification sticker

Introduction
This is a consumer package with the easy-coating kit (gloves, non-woven fabric for coating) and a coating notification sticker.

Available area
12㎡~24㎡

Industrial(Partner) package

NanoELAB Primer 1L

NanoEL AB Antimicrobial Disinfectant Coating Primer 1L

Contents
NanoEL AB Primer

Introduction
This is the pre-treatment and cleaning liquid. (NanoEL Primer must use before NanoEL Pro (Antimicrobial coating)).

Available area
200㎡~400㎡

20L_NanoELAB_Primer

NanoEL AB  Antimicrobial Disinfectant Coating Primer 20L

Contents
NanoEL AB Primer

Introduction
This is the pre-treatment and cleaning liquid. (NanoEL Primer must use before NanoEL Pro (Antimicrobial coating)).

Available area
4000㎡~8000㎡

NanoELAB Primer 1L

NanoEL AB  Antimicrobial Disinfectant Coating Pro 1L

Contents
NanoEL AB Pro

Introduction
The antimicrobial coating liquid
(NanoEL Primer must use before NanoEL Pro.)

Available area
200㎡~400㎡

1L_NanoELAB_Pro

NanoEL AB Antimicrobial Disinfectant Coating Pro 20L

Contents
NanoEL AB Pro

Introduction
The antimicrobial coating liquid
(NanoEL Primer must use before NanoEL Pro.)

Available area
4000㎡~8000㎡

Usage

① Cleaning & Pre-treatment:

Product : NanoEL AB Primer

Shake well then spray it evenly on the surface. Wipe with non-woven fabric or sponge until the primer is dried perfectly.

② Antimicrobial coating:

Product : NanoEL AB Pro

Shake well then spray it evenly on the surface. Rub smoothly with a clean fabric until it is gone. If it is sprayed too much, clean the rest of them with a clean fabric.

  • If there is any residue, clean it away with a new towel.
  • The coating surface is invisible since it is a 100% transparent and ultra-thin layer (150nm).

③ Activate the surface

Do not touch for 30 min. for activating the stable coating surface. For best results, 6 hours curing time is recommended.

For professional applicatio

NanoEL AB can be applied to massive targets in a professional way like a high-pressure sprayer, automatic facility. Please contact sales2@khaiel.com for more information.

Maintenance

Regular cleaning

Regular cleaning is needed since the dust on the coating surface might reduce the antimicrobial effects. Use a neutral detergent to avoid damaging the coating layer.

Recoating

Recoating may be required depending on the condition of the coating surface. It depends on the contact of frequency, but recoating is recommended every 6 months.

Caution

  • Store to avoid freezing. Do not expose heat or direct ray of the sun.
  • Keep away from children.
  • Recommend wearing gloves for use.
  • General advice: If symptoms appear, consult a doctor.
  • If inhaled: Move out of the dangerous area and find a place to get fresh air
  • Skin contact: Clean well with water and soap the contacted area.
  • Eye contact: Clean with a large amount of water.
  • If swallowed: Symptoms appear, seek medical advice.

For Cotton, Untreated wool, Synthetic fibers, Linen

NanoEL AB  Antimicrobial Coating
Textile Solution 10

Textile Solution

Contact us

8 + 13 =

The captcha should be input for preventing spam.